Facade Cleaning
Facade Cleaning
Protect your building’s first impression—and the materials behind it. Our Facade Cleaning service removes dust, traffic film, hard-water stains, silicone smears, efflorescence, algae, and bird droppings while preserving glass, stone, metal cladding, and ACP. We match methods to material so finishes stay bright and warranties intact.
From low-rise showrooms to high-rise towers, we plan access safely and efficiently—water-fed poles, cradle/BMU, rope access, or boom lifts—then use the right chemistry, controlled pressure, and deionised water for a streak-free finish. The result: longer coating life, clearer glass, and a sharp, presentable exterior.
Service Overview
We begin with a site survey: access points, anchor systems, wind corridors, overspray risk, and finish types. After a small test patch, we finalise the method statement (chemicals, dwell times, pressure, tools) and a work sequence that minimises disturbance to tenants and pedestrians. Barricading, spotters, and signage are deployed before work starts; a joint QA is done at handover.
Scope we cover (customised to your facade):
Glass & Glazing: Deionised water-fed pole wash, squeegee detail, spot removal (silicone, adhesive), mineral deposit (hard-water) treatment.
Stone & Masonry: Algae/mildew treatment, poultice/gel for rust/efflorescence, controlled low-pressure rinse; optional breathable sealers.
Metal/ACP/Cladding: pH-appropriate detergents, oxidation removal (where safe), protective wax/sealant on request.
Signage & Canopies: Degrease, bug/bird-dropping removal, polycarbonate-safe cleaning.
Post-Construction Clean: Cement haze, paint/adhesive removal, sticker residue, scratch-safe razors and solvents.
Access Methods: Rope access (by certified technicians), BMU/cradle ops, MEWP/boom lifts, scaff and confined-area solutions.
Safety & Compliance: Method statements, risk assessments, LOTO for nearby equipment if needed, barricading/spotters, waste capture where required.
Maintenance Plans: Quarterly/bi-annual cycles with targeted stain treatments to prevent permanent etching.
Suitable for: offices, malls, hotels, hospitals, schools, residential towers, showrooms, and mixed-use complexes.
Expert
Cleaners
Top Quality
Results
Time
Saving
Healthier
Spaces
Flexible
Scheduling
Stress
Free
Eco-Friendly
Solutions
Affordable
Pricing
Frequently Asked Questions
After a test patch and material check, we choose DI water-fed poles, controlled-pressure wash, gel/poultice treatments, or hand detail—ensuring compatibility with glass coatings, stone, and ACP finishes.
No. We use non-abrasive pads, scratch-safe blades where appropriate, and pH-matched chemistry. Any oxidation/stain removal is tested first to protect coatings and paint layers.
We prepare a method statement and risk assessment, deploy barricading and spotters, and operate via certified rope access/BMU/MEWP teams. Building permissions and lift bookings are coordinated in advance.
Typically twice a year for urban/traffic-heavy zones; quarterly for coastal or construction-adjacent sites. Glass exposed to sprinklers/hard water may need targeted monthly spot treatments.
Yes—using mineral deposit removers, poultices, or solvent gels. Severe etching (glass micro-pitting) may not fully reverse; we’ll advise post test-section results and suggest protective measures.
Our Services
Contact Us
Have questions? Get in touch!
Location
A1005, 10th Floor, The Platina Building, Gachibowli, Hyderabad, Telangana, India
Call Us
+91 8977758262
Alternate Number
+91 8977758261
Mail Us
solutions@caereindia.com